Your body requires proper nutrition and responsible care for top-tier performance. Though it may not be as obvious, engines require many of the same things, especially as they age. What you put into your engine affects how well and how long it runs — especially in high demand, high stress and high-speed situations.
Whether you push your vehicle to its limits, rely on it at the job site, or depend on it for everyday performance, you need engine protection that can keep up. Regular oil is a vital factor in this equation, but it isn’t immune to extreme temperatures and degradation. Engine additives help enhance your engine’s performance by solving some of the common issues oil faces.
For reliable performance in extreme temperatures and harsh conditions, turn to trusted products with a cult following among race teams, master mechanics and automotive enthusiasts: Hy-per Lube Oil Supplement. What makes Hy-per Lube products legendary? Take a look.
Posted on: Dec 1 2019
Almost everyone who’s into cars has an older vehicle that they love. Whether it’s the feeling that they get behind the wheel or the way the car looks parked in their driveway, they pour their time and effort into maintaining the car and keeping it looking like it’s just been driven off of the lot. For your own classic car or hot rod, you want the best, and zinc oil additives are the types of products that will help you give your car the best protection possible.
Posted on: Nov 15 2019
The opportunity to drive for the first time is one of the most exciting milestones of a teenager’s life. Being able to drive represents freedom, independence and the first step to adulthood, so that first car is a big deal. Your teen, of course, would love to have the most expensive, cool-looking, sporty new car on the market, but you have to be the voice of reason. Right?
Sinking a ton of money into a brand-new car for your child is not recommended for many reasons. One, teenage drivers get into accidents at the highest rate, meaning not only can you expect to pay insanely high insurance premiums on a new car for a teen, but there’s a better-than-average chance that the car won’t survive (while in pristine condition) long enough to justify the expense. Two, the cost of your teen’s car is probably coming out of the family budget, which is often already strained by things like the cost of the car or cars you already have.
Finally, there are plenty of dependable, very reliable used cars on the market to choose from that can be a great value. But how do you know which ones they are? What are the best cars for teens when looking for used cars?
Posted on: Jul 1 2019
One of the problems you want to avoid when it comes to your car is having your engine coolant mixing with your oil. This can cause serious damage to your car, and if you discover it happening, you need to address it immediately.
But first off: how do oil and coolant get mixed together and what exactly can you do about it?
Why Is There Oil in My Coolant?
If there is oil in your coolant or vice versa, it generally means there is a failure in one or more of your engine’s gaskets or seals. Your engine is designed so that there is one system that controls engine oil to lubricate your vehicle and another that manages coolant to keep your car from overheating. Your cylinder head gasket (aka “head gasket”) is the part of your engine that prevents coolant or oil from leaking into one another. If you have a broken or damaged head gasket, you can expect your oil and coolant to start mixing.
Oil and coolant can also end up mixing if your engine overheats and either destroys the gasket or cracks the cylinder head. An accident that cracks the cylinder head or damages the engine block can result in oil and coolant mixing as well. We talk to customers all the time that have this problem.
Is Coolant in Engine Oil Dangerous?
As we pointed out and as you could probably guess, having your coolant and oil mixed is terrible for the health of your car. In basic terms, your car’s engine oil is designed to lubricate the internal components of your car so that they operate smoothly rather than grinding each other up via heat and friction.
You coolant has another purpose: it is designed to keep your car from overheating. The consequences of diluting either substance should be clear — but in case it’s not, the answer is that you can expect overheating and/or severe damage to your engine if you try to drive around with coolant leaking into oil or oil in the coolant reservoir.
How to Fix Oil in the Coolant Reservoir or Coolant in Your Oil
If you have oil mixed with coolant in the reservoir, you will notice a thick, milky or gravy-like substance that is a tell-tale sign that you have this issue. You will want to clean the reservoir thoroughly and flush the radiator with water. Similarly, you will want to check your oil dipstick and see if it shows an oil-coolant mixture in your oil tank. If so, you will want to change out your oil as well.
When changing the oil and coolant, we recommend adding quality products like our Hy-per Lube Oil Supplement. Hy-per Lube Oil Supplement seals piston rings and valve guides, which can prevent or reduce leaking issues. It can also give your oil greater protection, restore fuel economy and performance and extend the service life of your oil by as much as 50 percent.
You may also benefit from our Hy-per Cool Super Coolant, which is compatible with virtually every type of antifreeze and proven by independent Dyno-testing to lower engine temperatures up to 25 degrees Fahrenheit.
While the life of these solutions will vary according to the severity of the leak, the key is repairing it as soon as possible. If you are dealing with a blown head gasket, a cracked cylinder head or a cracked engine block — and if the leak is too severe — you may have to have a professional mechanic have a look.
With any luck, the problem will be minor, and the right stop leak/chemical fix will do the trick. However, if after your fix, your car quickly starts to overheat, turn off the vehicle and bring it in for repairs immediately. Your engine may already be severely damaged, and if not, it quickly will be if you continue to use the vehicle in its current state.
How Much Will It Cost to Fix Coolant in My Oil?
The temporary fix will only entail the cost of the replacement fluids and the stop leak products — it’s actually quite affordable. However, your long-term solution of fixing whatever gasket or component is causing the leak could be considerably more expensive. The worst-case scenario, the one you hopefully will not have to face, is that you have a crack in your engine block. If this is the situation, there is nothing to do but replace the engine, which typically runs about $4,000 to $8,000. Again, this is the worst-case scenario.
If you only have to replace the radiator and fix the transmission, it should not cost you more than $400 or $500. However, if your head gasket is completely destroyed and must be replaced, it could run you a couple thousand dollars, including parts and labor.
Hyper-Lube: Quality High-Performance Products for Your Car
If an accident damages your engine, there is little protection that proper vehicle maintenance can offer. But in general, using high-quality products and additives in your engine can often ward off problems like oil and coolant mixing.
If you’re looking for great products to help you get the most out of your oil and coolant, look to Hy-per Lube. Our experience with quality chemical additives for vehicle performance date back more than 60 years, to when Harold Hilton first formulated Hy-per Lube Oil Supplement back in the early ’50s.
We are constantly researching and perfecting our formulas, and today’s Hy-per Lube products are formulated with cutting-edge technology to maximize the benefits to your vehicle.
For maximum performance and protection, you need Hy-per Lube. We have a number of products to suit your vehicle’s needs. Remember that these products can potentially add extended life, performance and fuel economy benefits that can well outweigh the cost of the product.
To find a Hy-per Lube product near you, use this convenient store locator. Or, to discuss any of our products with a qualified expert, please feel free to contact us online right now.
Posted on: Jun 1 2019
Our legendary zinc replacement additive provides wear protection under extreme pressures
When it comes to delivering the required extreme pressure wear protection for motorsport and classic cars, today’s standard motor oils fall short. But there’s a reliable and affordable oil additive that can help.
Hy-per Lube Zinc Replacement Additive (p/n HPZ212) is designed specifically for vehicles and industrial engines in high-stress and demanding conditions and environments. It offers a simple and efficient way to keep cams, lifters and rocker arms safe and eliminate significant wear.
When motor oil manufacturers began reducing levels of ZDDP (Zinc Dialkyl Dithiophosphate) in their products to protect catalytic converters from premature damage, the change left owners of many types of older or high-performance vehicles built with flat tappet camshaft engines without the necessary wear protection. It’s a need that has only been growing with time, as modern oils continue to leave this hole unfilled.
The lack of the appropriate levels of ZDDP can result in camshaft wear, piston scuffing and damage to lifters and the valvetrain. This damage could mean reduced oil pressure, compression loss, lower fuel economy, leaks, smoking, noise, lost power and shorter engine life.
“When engine oils had more ZDDP, they were able to continually replenish the sacrificial coating on metal parts,” says Clay Parks, vice president of development for Hy-per Lube. “Today’s oils need help protecting those metal parts to limit excessive wear and parts failure. Our Zinc Replacement Additive delivers this protection better than high-content zinc motor oils.”
Hy-per Lube Zinc Replacement Additive contains an exclusive polymer ester formula, which when added to any motor oil, bonds to the metal surfaces to allow the parts to move more smoothly. These additives allow a tremendous amount of pressure to be applied to metal-on-metal surfaces without the additives losing their original properties or causing extreme wear to the cams, lifters and rocker arms.
Our zinc (ZDDP) replacement formula is compatible with all motor oils, including synthetic, and can be used in any vehicle year, make or model. The additive does not contain heavy metals, reduces cold-start wear after long periods of disuse and is safe to use with all engines, even those with catalytic converters. Gasoline-powered vehicles manufactured before 1996 and diesel-powered vehicles made before 2004 especially benefit.
Questions about whether this product is right for your car or industrial machine? Give us a call at 800-345-6572, or message us via Facebook and we’ll be happy to help. If email is more your thing, you can contact us here and we’ll answer any questions you may have.
Hy-per Cool Radiator Cleaner and Super Flush protects against engine overheating
Many of you made New Year’s resolutions for 2019: eat less, exercise more, stop smoking or other self-improvement goals. Now’s your chance to make sure keeping your vehicle’s radiator healthy in the new year makes the list. Might seem boring, but when your radiator has problems, your life has problems.
Over time, scale deposits and rust can build up in a radiator and can cause the vehicle to perform poorly or overheat, potentially damaging the entire cooling system. You can save hassle and expense by using a radiator flush that can eliminate and prevent this build-up, boost your vehicle’s performance and power, and extend the life of the water pump. It’s all available in one bottle. Literally.
Hy-per Cool™ Radiator Cleaner & Super Flush (p/n HFL400) is the highest-performing radiator cleaner and flush on the market. This professional-grade, proven formula:
- Cleans your entire cooling system
- Removes deposits and coolant gel
- Reduces overall operating temperature and efficacy of cooling system
- Instantly neutralizes acids that cause corrosion
- Helps prevent formulation of scales & deposits
Hy-per Cool Radiator Cleaner & Super Flush can be used in all gasoline and diesel engines. Unlike other flush products, this formula also contains a premium water pump lubricant that protects the pump seal from the abrasive material being cleaned out of the system. The lubricant also protects the water pump bearings if the seal was to fail during the flush procedure. One bottle treats up to 16-quart systems.
It’s not enough to add more water and antifreeze to your radiator as the fluid level decreases. A vehicle’s cooling system should be flushed – cleaned by circulating water and a cleaning agent throughout the engine – periodically to eliminate the dirt, rust and other harmful particles that build up inside the system that can clog your radiator or heater core. Hy-per Cool Radiator Cleaner & Super Flush cleans the entire system in 30 minutes or less, improving performance and protecting against overheating.
Hy-per Lube products are proudly made in the U.S.A., just an hour outside of Detroit, the Motor City.
Proven in racing, off-roading and even harsh-condition daily driving, Hy-per Lube Super Coolant helps engines run up to 25 degrees cooler while boosting performance.
Whether cruising around town or spending a weekend at the track, you need assurance that your coolant will provide the best possible protection from engine overheating. Chance are, if you are reading this, you also care about maximizing performance and keeping heat soak at bay.
Heat is generated in the cylinder head and as temperatures increase, so does the likelihood of pre-ignition and power loss unless ignition timing is retarded. This can also result in overheating and engine damage, unless enough heat is transferred into the coolant, carried to the radiator and then out into the air. That’s where Hy-per Lube Super Coolant comes in.
Hy-per Lube Super Coolant is a track-proven formula that reduces engine cylinder head temperatures to guard against overheating and allows the engine ECU to safely advance ignition timing, which results in maximum power output. It accomplishes this by reducing the surface tension of coolant, allowing it to more deeply penetrate metal surfaces at critical heat transfer areas inside the engine and radiator.
This results in more heat being transferred away from cylinder heads and a reduction in engine operating temperatures. Independent dyno tests prove that Hy-per Lube Super Coolant helps street applications using a 50/50 mix to run 8-10°F cooler, and racing applications using straight water to run up to 25°F cooler. Actual cylinder head temperatures can be reduced by up to 50°F.
But it’s not just for summer – Hy-per Lube Super Coolant also provides faster engine warm-up during cold weather. It is formulated to protect all metals found in cooling systems, including aluminum. Super Coolant provides complete protection from rust, corrosion, and electrolysis. This is particularly important in straight water applications where there is no corrosion protection being provided by the corrosion inhibitors in antifreeze. It is safe for use on all racetracks.
Super Coolant is compatible with all types and all colors of anti-freeze, including Dex-Cool. One bottle treats systems from 12 to 20 quarts.
If you have any questions about Hy-per Lube Super Coolant, leave a comment below, or hit us up on Facebook. We’re happy to help.
We get this question all the time when talking to customers on our tech line: What is the best type of water to use in my cooling system?” In this post, we would like to address this topic, as the plethora of misinformation regarding this topic has easily made it the most misunderstood.
Many people have “heard” that distilled water is the best water to use in a cooling system. This is wrong! While it is certainly true that distilled water’s purity prevents electrolysis and scale/deposit formation, it unfortunately comes with a potentially very damaging side effect. (more…)
Cars have a rich and interesting history. Even with modern day vehicles, there’s still a lot that people don’t know. Find out some interesting facts below!
1. Despite how cool and high-tech dashboards are getting, they date back to some of the earliest days in driving history. They were actually just wooden boards that were placed in front of a carriage. They would block the liquids and mud that horses would kick up into the area people sat.
Posted on: Aug 5 2013
Used cars have their advantages, and just because they carry the “used” title doesn’t mean the process needs to be a total crap shoot. Perhaps you’re looking for a reliable choice for your teen, or just a way to avoid paying an unnecessary amount of money to get that new car smell. Buying a used car can be tricky, and sadly, good honest salesmen are few and far between. Don’t give yourself any unnecessary stress. Follow these steps to make sure you’re choosing the right car.
In your initial used-car-hunting stages, you can do some simple tests to see if the car is worth the next step (taking it to a mechanic.) The first thing to look for is rust and dents on the exterior. Rust can turn into a huge problem on used cars, especially if there has been no attempt to treat it. When you’re done looking on the outside, look for similar problems under the hood. Try the quarter test on the tires, and look for other issues like interior seat ripping and bad headlights. If there are no blatant, forewarning issues, it’s very important to take your car to a mechanic. The mechanic’s bill is just a small price on such a major purchase. (more…)
Posted on: Jul 29 2013